Skip to content

Remove print debugging. #350

Remove print debugging.

Remove print debugging. #350

Workflow file for this run

###
# Initially copied from
# https://github.com/actions/starter-workflows/blob/main/ci/python-package.yml
# And later based on the version I (jamadden) updated at gevent/gevent
#
# Original comment follows.
###
###
# This workflow will install Python dependencies, run tests and lint with a variety of Python versions
# For more information see: https://help.github.com/actions/language-and-framework-guides/using-python-with-github-actions
###
###
# Important notes on GitHub actions:
#
# - We only get 2,000 free minutes a month (private repos)
# - We only get 500MB of artifact storage
# - Cache storage is limited to 7 days and 5GB.
# - macOS minutes are 10x as expensive as Linux minutes
# - windows minutes are twice as expensive.
#
# So keep those workflows light.
#
# In December 2020, github only supports x86/64. If we wanted to test
# on other architectures, we can use docker emulation, but there's no
# native support.
#
# Another major downside: You can't just re-run the job for one part
# of the matrix. So if there's a transient test failure that hit, say, 3.8,
# to get a clean run every version of Python runs again. That's bad.
# https://github.community/t/ability-to-rerun-just-a-single-job-in-a-workflow/17234/65
name: tests
# Triggers the workflow on push or pull request events
on: [push, pull_request]
# Limiting to particular branches might be helpful to conserve minutes.
#on:
# push:
# branches: [ $default-branch ]
# pull_request:
# branches: [ $default-branch ]
env:
# Weirdly, this has to be a top-level key, not ``defaults.env``
PYTHONHASHSEED: 8675309
PYTHONUNBUFFERED: 1
PYTHONDONTWRITEBYTECODE: 1
# PYTHONDEVMODE leads to crashes in pylibmc.
# See https://github.com/lericson/pylibmc/issues/254
# - PYTHONDEVMODE=1
PYTHONFAULTHANDLER: 1
PIP_UPGRADE_STRATEGY: eager
# Don't get warnings about Python 2 support being deprecated. We
# know. The env var works for pip 20.
PIP_NO_PYTHON_VERSION_WARNING: 1
PIP_NO_WARN_SCRIPT_LOCATION: 1
# Disable some warnings produced by libev especially and also some Cython generated code.
# These are shared between GCC and clang so it must be a minimal set.
# TODO: Figure out how to set env vars per platform without resorting to inline scripting.
CFLAGS: -Ofast -pipe
CXXFLAGS: -Ofast -pipe
# Uploading built wheels for releases.
# TWINE_PASSWORD is encrypted and stored directly in the
# travis repo settings.
TWINE_USERNAME: __token__
###
# caching
###
CCACHE_DIR: ~/.ccache
CC: "ccache gcc"
CCACHE_NOCPP2: true
CCACHE_SLOPPINESS: file_macro,time_macros,include_file_ctime,include_file_mtime
CCACHE_NOHASHDIR: true
#
jobs:
test:
runs-on: ${{ matrix.os }}
strategy:
matrix:
# 3.12.1 breaks zope.testrunner.
# See https://github.com/zopefoundation/zope.testrunner/issues/157
python-version:
- '3.9'
- '3.10'
- '3.11'
- "3.12"
- "3.13"
- "pypy-3.10-v7.3.17"
os: [ubuntu-latest, macos-latest]
exclude:
# Can't build persistent on 3.12 with -UNDEBUG because it
# accesses fields of objects that aren't there in assert statements;
# we build linux with assertions enabled, and unless there is a 3.12
# persistent wheel, we have to exclude that one.
# The same thing goes for PyPy.
- os: ubuntu-latest
python-version: "pypy-3.10-v7.3.17"
steps:
- name: checkout
uses: actions/checkout@v4
- name: Set up Python ${{ matrix.python-version }}
uses: actions/setup-python@v5
with:
python-version: ${{ matrix.python-version }}
cache: 'pip'
cache-dependency-path: setup.py
- name: Install ccache, configure CFLAGS (ubuntu)
uses: ./.github/actions/config-cc
- name: Install native libs
uses: ./.github/actions/install-native-libs
- name: Install Build Dependencies
run: |
pip install -U pip
pip install -U -q setuptools wheel twine
pip install -q -U 'cython>=3.0'
pip install -U coverage
pip install -U cffi
- name: Build mysqlclient
# Ubuntu 20 doesn't have libmysqlclient.20, but mysqlclient
# client binaries on PyPI are linked against that. We can install that,
# but then SSL breaks for an unknown reason, and we can't disable SSL
# because authentication requires it (maybe we could change the authentiaction plugin?)
# So instead we install the development sources and compile mysqlclient locally.
# The relevant package, libmysqlclient-dev, is already installed.
if: startsWith( matrix.os, 'ubuntu-20')
run: |
pip install --no-binary :all: mysqlclient
- name: Install RelStorage (non-Mac)
if: ${{ ! startsWith(runner.os, 'Mac') }}
run: |
python setup.py bdist_wheel
WHL=$(ls dist/*whl)
python -m pip install -U "$WHL[test,docs,all_tested_drivers]"
env:
# Ensure we test with assertions enabled.
# As opposed to the manylinux builds, which we distribute and
# thus only use O3 (because Ofast enables fast-math, which has
# process-wide effects), we test with Ofast here, because we
# expect that some people will compile it themselves with that setting.
CPPFLAGS: "-Ofast -UNDEBUG"
- name: Install RelStorage (Mac)
if: startsWith(runner.os, 'Mac')
run: |
python setup.py bdist_wheel
WHL=$(ls dist/*whl)
python -m pip install -U "$WHL[test,docs,all_tested_drivers]"
env:
# Unlike the above, we are actually distributing these
# wheels, so they need to be built for production use.
CPPFLAGS: "-O3"
# Build for both architectures
ARCHFLAGS: "-arch x86_64 -arch arm64"
- name: Check RelStorage build
run: |
ls -l dist
twine check dist/*
- name: Upload RelStorage wheel
uses: actions/upload-artifact@v4
with:
name: RelStorage-${{ runner.os }}-${{ matrix.python-version }}.whl
path: dist/*whl
- name: lint
if: matrix.python-version == '3.11' && startsWith(runner.os, 'Linux')
# At this writing, PyLint 2.17/astroid 2.15 won't work on 3.12
run: |
pip install -U pylint
python -m pylint --limit-inference-results=1 --rcfile=.pylintrc relstorage -f parseable -r n
- name: Initialize Test Databases
if: startsWith(runner.os, 'macOS')
run: |
brew services start mysql
brew services start postgresql
# Make sure postgresql is accepting connections.
# TODO: Use pg_isready in a loop?
sleep 5
# XXX: mysql isn't currently starting. Why? So
# skip initializing it.
#
# brew postgres uses the current username, apparently, instead of
# the standard "postgres" user as the root. It still uses 'postgres'
# as the default database, though.
brew services list
RELSTORAGETEST_PG_UNAME=$USER RELSTORAGETEST_PG_DBNAME=postgres .travis/postgres.sh
- name: Initialize Test Databases
if: startsWith(runner.os, 'Linux')
run: |
sudo systemctl start mysql.service
echo Configuring MySQL
RELSTORAGETEST_MY_PW="--password=root" .travis/mysql.sh
# XXX: Disabled: The software is installed, but isn't running by default,
# apparently. They *really* want you to use a docker service.
# echo Configuring PostgreSQL
# .travis/postgres.sh
- name: Run tests and report coverage
uses: ./.github/actions/run-tests
with:
useCoverage: ${{ !startsWith(matrix.python-version, 'pypy') }}
- name: Coveralls Parallel
uses: coverallsapp/github-action@v2
if: ${{ !startsWith(matrix.python-version, 'pypy') }}
with:
flag-name: run-${{ join(matrix.*, '-') }}
parallel: true
- name: Publish package to PyPI (mac)
# We cannot 'uses: pypa/[email protected]' because
# that's apparently a container action, and those don't run on
# the Mac.
if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags') && startsWith(runner.os, 'Mac')
env:
TWINE_PASSWORD: ${{ secrets.TWINE_PASSWORD }}
run: |
twine upload --skip-existing dist/*
coveralls-finish:
needs: test
if: ${{ always() }}
runs-on: ubuntu-latest
steps:
- name: Coveralls Finished
uses: coverallsapp/github-action@v2
with:
parallel-finished: true
manylinux:
needs: test
runs-on: ubuntu-latest
# We use a regular Python matrix entry to share as much code as possible.
strategy:
matrix:
python-version: [3.9]
image:
- manylinux_2_28_x86_64
- manylinux2014_aarch64
- manylinux2014_ppc64le
- manylinux2014_s390x
- manylinux2014_x86_64
- musllinux_1_1_x86_64
- musllinux_1_1_aarch64
name: ${{ matrix.image }}
steps:
- name: checkout
uses: actions/checkout@v4
- name: Set up Python ${{ matrix.python-version }}
uses: actions/setup-python@v5
with:
python-version: ${{ matrix.python-version }}
- name: Set up QEMU
uses: docker/setup-qemu-action@v3
with:
platforms: all
- name: Build RelStorage
env:
DOCKER_IMAGE: quay.io/pypa/${{ matrix.image }}
run: bash ./scripts/releases/make-manylinux
- name: Store RelStorage wheels
uses: actions/upload-artifact@v4
with:
path: wheelhouse/*whl
name: ${{ matrix.image }}_wheels.zip
- name: Publish package to PyPI
uses: pypa/[email protected]
if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags')
with:
user: __token__
password: ${{ secrets.TWINE_PASSWORD }}
skip_existing: true
packages_dir: wheelhouse/
# TODO:
# * Use YAML syntax to share snippets, like the old .travis.yml did
# Sadly, as of 2021-02-01, Github Actions does not support anchors at
# all. Just having an anchor results in an error:
#
# The workflow is not valid. .github/workflows/tests.yml: Anchors
# are not currently supported. Remove the anchor 'an-strategy'
#
# The alternative of using composite actions doesn't work either,
# because composite actions are limited to running shell scripts.
# Steps in them can't call other actions with `uses:`, and nor can
# they be conditional with `if:`.