Skip to content

Necroneco/AqaraGateway

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 

Repository files navigation

Buy Me A Coffee

Aqara Gateway/Hub (G2H, M1S CN, P3 CN, M2 CN, H1 CN, E1 CN, G3 CN, G2H Pro, M2 2022, M2 old EU/Global, M1S 2022, M3) integration for Home Assistant

Control Zigbee devices from Home Assistant with Aqara Gateway (KTBL12LM, ZHWG15LM, ZHWG12LM, ZNSXJ12LM, ZNSXJ12LM, ZNSXJ13LM, ZNSXJ15LM, ZHWG19LM, ZHWG20LM, ZHWG24LM). Gateway support Zigbee 3.

This integration was based on the development of @AlexxIT, Thanks Alex.

ATTENTION: The component only works on modified firmware (M2) or the gateway which was enabled telnet.

ATTENTION2: The Lumi company (Aqara manufacturer) started disable the post_init script. If you still want to use this component, please do not update to latest firmware of the gateway/hub. If you already updated to latest firmware and telnet is not working, you need switch to Mi Home mode and enable telnet by soft_hack method. Then flash modified firmware.

For Gateway M2 and Switch H1 Hub, to flash modified firmware to M2, please use AqaraGateway.exe to flash customize firmware. Need to open the case of gateway and wired out the UART of M2 or H1.

For Gateway M1S CN, AirCondition P3 CN, Hub E1 CN, Gateway M1S 2022 CN, please switch to Mi Home mode, and get the token.

Installation

you can install component with HACS, custom repo: HACS > Integrations > 3 dots (upper top corner) > Custom repositories > URL: niceboygithub/AqaraGateway > Category: Integration

Or Download and copy custom_components/aqara_gateway folder to custom_components folder in your HomeAssistant config folder

Configuration

  1. ⚙️ Configuration > 🧩 Integrations > ➕ Add Integration > 🔍 Search Aqara Gateway

Or click (HA v2021.3.0+): add

  1. If the integration didn't show up in the list please REFRESH the page
  2. If the integration is still not in the list, you need to clear the browser cache.
  3. Enter Gateway IP address.
  4. If you applied a password of telnet in gateway, please enter the password. Otherwise, ignore this field.
  5. Enter the xiaomi token of gateway if it is the first time to add integration. Otherwise, ignore this field.
  6. Click Send button, then wait this integration is configured completely.
  7. Done

More detail instructions from @InsaneWookie

Manually Enable Telnet

ATTENTION: There is a good news to enable telnet manually. The magic is "5 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause" from here. The Lumi removed the method "set_ip_info" in the new version of M1S "Mi version 4.0.3_0012, Aqara version 3.5.2_0010.0636" and other hubs also. If you were already upgrade to this verison, the only way to enabled customed firwmware by AqaraGateway.exe or use gw_global_tool to clean password and flash customed firmware.

You can use custom open telnet command way 2 or way 3 to enable telnet in Mija Home mode, then flash modification firmwares to M1S, P3, E1, if you want use them in Aqara Home. No need to open the case of gateway.

After telnet to gateway via putty, there are two methods (Flash or Not) to enable telnet and public mqtt.

Not Flash modified firmware method (NOT for G2H, E1 hub, G3, G2H Pro, M2 2022, M3)

mkdir /data/bin
cd /data/bin
wget -O /data/bin/curl "http://master.dl.sourceforge.net/project/mgl03/bin/curl?viasf=1"; chmod +x /data/bin/curl
/data/bin/curl -s -k -L -o /data/bin/mosquitto https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/binutils/mosquitto; chmod a+x /data/bin/mosquitto

mkdir /data/scripts
cd /data/scripts
/data/bin/curl -s -k -L -o /data/scripts/post_init.sh https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/binutils/post_init.sh
chmod +x /data/scripts/post_init.sh

Then restart gateway by reboot command.

Not Flash modified firmware method (for G2H)

mkdir /data/bin
cd /data/bin
wget -O /tmp/curl "http://master.dl.sourceforge.net/project/aqarahub/binutils/curl?viasf=1"; chmod +x /tmp/curl
/tmp/curl -s -k -L -o /data/bin/mosquitto https://raw.githubusercontent.com/niceboygithub/AqaraCameraHubfw/main/binutils/mosquitto; chmod a+x /data/bin/mosquitto

Not Flash modified firmware method (for G2H Pro)

mkdir /data/bin
cd /data/bin
wget -O /tmp/curl "http://master.dl.sourceforge.net/project/aqarahub/binutils/curl?viasf=1"; chmod +x /tmp/curl
/tmp/curl -s -k -L -o /data/bin/mosquitto https://raw.githubusercontent.com/niceboygithub/AqaraCameraHubfw/main/binutils/mosquitto_g2hpro; chmod a+x /data/bin/mosquitto

mkdir /data/scripts
cd /data/scripts
echo -e "#!/bin/sh\n\nfw_manager.sh -r\nfw_manager.sh -t -k" > /data/scripts/post_init.sh
chmod +x /data/scripts/post_init.sh
chattr +i /data/scripts; chattr +i /data/scripts/post_init.sh

Not Flash modified firmware method (for E1 hub, G3, M2 2022, M3)

mkdir /data/bin
cd /data/bin
wget -O /tmp/curl "http://master.dl.sourceforge.net/project/aqarahub/binutils/curl?viasf=1"; chmod +x /tmp/curl
/tmp/curl -s -k -L -o /data/bin/mosquitto https://raw.githubusercontent.com/niceboygithub/AqaraCameraHubfw/main/binutils/mosquitto_e1; chmod a+x /data/bin/mosquitto

mkdir /data/scripts
cd /data/scripts
echo -e "#!/bin/sh\n\nfw_manager.sh -r\nfw_manager.sh -t -k" > /data/scripts/post_init.sh
chmod +x /data/scripts/post_init.sh
chattr +i /data/scripts; chattr +i /data/scripts/post_init.sh

Flash M1S modified firmware method

cd /tmp && wget -O /tmp/curl "http://master.dl.sourceforge.net/project/mgl03/bin/curl?viasf=1" && chmod a+x /tmp/curl
/tmp/curl -s -k -L -o /tmp/m1s_update.sh https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/modified/M1S/m1s_update.sh
chmod a+x /tmp/m1s_update.sh && /tmp/m1s_update.sh

If there is no any error generated, then restart gateway by reboot command.

Flash M2 modified firmware method

cd /tmp && wget -O /tmp/curl "http://master.dl.sourceforge.net/project/mgl03/bin/curl?viasf=1" && chmod a+x /tmp/curl
/tmp/curl -s -k -L -o /tmp/m2_update.sh https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/modified/M2/m2_update.sh
chmod a+x /tmp/m2_update.sh && /tmp/m2_update.sh

If there is no any error generated, then restart gateway by reboot command.

Flash P3 modified firmware method

cd /tmp && wget -O /tmp/curl "http://master.dl.sourceforge.net/project/mgl03/bin/curl?viasf=1" && chmod a+x /tmp/curl
/tmp/curl -s -k -L -o /tmp/p3_update.sh https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/modified/P3/p3_update.sh
chmod a+x /tmp/p3_update.sh && /tmp/p3_update.sh

If there is no any error generated, then restart gateway by reboot command.

Flash H1 modified firmware method

cd /tmp && wget -O /tmp/curl "http://master.dl.sourceforge.net/project/mgl03/bin/curl?viasf=1" && chmod a+x /tmp/curl
/tmp/curl -s -k -L -o /tmp/h1_update.sh https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/modified/H1/h1_update.sh
chmod a+x /tmp/h1_update.sh && /tmp/h1_update.sh

If there is no any error generated, then restart gateway by reboot command.

Not Flash E1 modified firmware method

Suggest to use another expert's method, pleae move to his github to see hot to do it. He provides a way that avoid any risk on flashing firmwares.

If there is no any error generated, then restart gateway by reboot command.

Note: It updates firmware only if the checksum of the downloaded file is correct.

For M2 old EU/Global

Use this tool to clean telnet login password. The firmware before the version 4.0.4 was enabled telnetd as default. After clear the login password, you can this integration now.

chmod a+w /data/scripts/post_init.sh
echo -e "#!/bin/sh\n\nfw_manager.sh -r \nfw_manager.sh -t -k" > /data/scripts/post_init.sh
chattr +i /data/scripts; chattr +i /data/scripts/post_init.sh

For G2H

There is a way to enable telnetd.

For G3, G2H Pro

There is a way to enable telnetd from #Wh1terat. After enabled telnet, you need use putty to telnet . Then enter the following commands.

chmod a+w /data/scripts/post_init.sh
echo -e "#!/bin/sh\n\nasetprop sys.camera_ptz_moving true\nfw_manager.sh -r\nfw_manager.sh -t -k" > /data/scripts/post_init.sh
chattr +i /data/scripts; chattr +i /data/scripts/post_init.sh

Due to Lumi closed the exploit and removed post_init.sh feature after version 3.4.1. It won't support after the version 3.3.9 of G3 firmware. If you want to enable telnet of G3, you need to downgrade the firmware to the version 3.3.4. The method to downgrade is as the following steps.

1. Get 'rootfs.bin' of firmware version 3.3.4. (use 7z to extract the firmware bin)
2. Copy 'rootfs.bin' to sdcard which is using FAT32 format.
3. Power Off G3.
4. Insert the sdcard to G3.
5. Press the front button of G3.
6. Power on G3.
7. Wait three seconds and release the button.
8. If the LED is turned to RED, it starts to flash 'rootfs.bin'.

Important: Aqara may force your G3 to upgrade to latest without your permission. To lock firmware update, please use below commands to lock by telnet.

mkdir -p /data/ota_dir
touch /data/ota_dir/lumi_fw.tar
chattr +i /data/ota_dir;chattr +i /data/ota_dir/lumi_fw.tar

Flash G3 customized firmware

USING AT YOUR OWN RISK. Go to this link and follow the intrusion after enabled telnet.

For M1S 2022

Only support the firmware version above 4.x and flashed the modified firmware. You need to use UART to clear the password of root and flash modified firmware.

How to check this component is working properly.

Go to Configuration->Info->system_health

Aqara Presence Detector FP1

Movements sensor

In the left and right monitoring mode, only report 2, 3, 4, 5, 6, 7;
In the non-directional monitoring mode, only report 0, 1, 6, 7;
0: enter
1: leave
2: left in
3: right out
4: right in
5: left out
6: approaching
7: far away

Attention: The component is under active development.

About

Aqara Gateway/Hub integration for Home Assistant

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%