Skip to content

Latest commit

 

History

History
100 lines (81 loc) · 4.3 KB

README.md

File metadata and controls

100 lines (81 loc) · 4.3 KB

IBM Data Engine for NoSQL Software Libraries

IBM Data Engine for NoSQL - Power Systems Edition creates a new tier of memory by attaching up to 57 Terabytes of auxiliary flash memory to the processor without the latency issues of traditional I/O storage. While not as fast as DRAM, the latency is within the acceptable limit of most applications especially when data is accessed over the network. Flash is also dramatically less expensive than DRAM, and helps reduce the deployment and operational cost for delivering the customer solution. Customers, MSPs, and ISPs all benefit from the application of this new technology in the NoSQL application space. Exploiting hardware and software built-in to IBM’s flagship POWER8 open architecture means that clients no longer must choose between “big” or “fast” for their solutions. Read more, including API guides at:

API Guide

The IBM Data Engine for NoSQL provides two major sets of public APIs. These are described in:

Building and installing

Builds are configurable for different purposes. If no Data Engine for NoSQL Accelerator is available, you can still do active development using a "File Mode." See below for how to select the mode. Likewise, you may also select the endianness of your code (if needed).

As a developer, to get started:

1. clone the repository
2. cd capiflash
3. select a customrc file (see below)
4. source env.bash
5. make configure
6. make clean
7. make installsb

Build Targets

make             #build the code, excluding test code
make tests       #build only the test code
make buildall    #build all the code
make installsb   #build all the code, install all the code into the root fs (requires sudo)

Targeting a specific platform or tuning - the "customrc" file

Note: Developers have options to enable / disable specific targets (e.g. Big endian PPC64BE vs little endian PPC64EL) or P8 vs P7 tunings. See the customrc.p8be as an example. Creating a new component-specific environment variable is legal, however the env variable should be optional and provide a default that is safe for production.

Current valid options
ENV Variable Component Usage (BOLD = default)
TARGET_PLATFORM (all) PPC64BE - Big-Endian Structures
PPC64LE - Little-Endian Structures
CUSTOMFLAGS (all) Custom GCC flags. Used typically to enable P8 or P7 tunings, debug, optimization, etc.
BLOCK_FILEMODE_ENABLED block Forces Block Layer to redirect all IO to a file instead of a CAPI device. 1 = enabled, 0 = disabled
BLOCK_KERNEL_MC_ENABLED block Enables block layer to communicate with cxlflash driver built in to the Linux kernel. For more information, see https://www.kernel.org/doc/Documentation/powerpc/cxlflash.txt

Prebuilt customrc files exist for different environments. Most users will want to use "customrc.p8elblkkermc" or "customrc.p8el"

Filename Description
customrc.p8el Little-endian Linux, P8 Tunings, Block FileMode enabled
customrc.p8elblkkermc Little-endian Linux, P8 Tunings, Real IO to CXL Flash kernel driver

Utilities

Test File IO

Example on a POWER8 Little-endian system:

#build
cd .../capiflash
ln -s customrc.p8el customrc
source env.bash
make clean
make installsb
#create a 4gb test file in /tmp
fallocate -l 4g /tmp/testfile
#run the FVT
FVT_DEV=/tmp/testfile run_fvt
#run FILE IO
blockio -d /tmp/testfile

Test Real IO

Example on a POWER8 Little-endian system:

#build
cd .../capiflash
ln -s customrc.p8elblkkermc customrc
source env.bash
make clean
make installsb
#select a /dev/sgX device
sudo cxlfrefreshluns
sudo cxlfstatus
  sg8:     1:0:0:0,   sdc,     legacy,    60025380025382462300058000000000
#set the lunmode to superpipe
sudo cxlfsetlunmode 60025380025382462300058000000000 1
#run the FVT
sudo FVT_DEV=/dev/sg8 run_fvt
#run Real IO
sudo blockio -d /dev/sg8 -p