Replies: 9 comments 43 replies
-
|
It seems like the newly added add_valid_colors func is not found on the train program. Can you redownload the hub programs (activate the Download checkbox in the hub GUI before connecting your hubs) for all the trains you are using and check if the problem still happens? If that's the case, it is weird that Brickrail didn't detect automatically that the program changed... Did you manually disable the Download checkbox at some point since you updated Brickrail? |
Beta Was this translation helpful? Give feedback.
-
|
Or are you maybe using multiple hubs with the same name? Then Brickrail might think It already downloaded the new program even though it's a different hub with the same name. |
Beta Was this translation helpful? Give feedback.
-
|
Also can you send me your .brl layout file? In the logs a (probably unrelated) error shows up that I want to investigate. |
Beta Was this translation helpful? Give feedback.
-
|
When I updated to the new master it didn't set the download checkbox. Once I did that and forced the train I didn't remove to download it all worked. Here is the layout file... it may only hace 2 trains. |
Beta Was this translation helpful? Give feedback.
-
|
I might have found the reason why it wouldn't trigger the automatic redownload for your hubs. Current master has a fix for it. Next time you run brickrail with the new master version, I would be interested in the brickrail logs. |
Beta Was this translation helpful? Give feedback.
-
|
I will soon. Brickrail logs from this run, selecting download and also the sensor color issue. |
Beta Was this translation helpful? Give feedback.
-
|
This time it set the download flag to update |
Beta Was this translation helpful? Give feedback.
-
|
There is an issue now with finding the colors, I get errors in some of them. In both cases it went over a red sensor.
|
Beta Was this translation helpful? Give feedback.
-
|
No |
Beta Was this translation helpful? Give feedback.
-
|
BTW, The error message means specifically that according to what you set in Brickrail, the marker it expects is red. However, it measured a different color (green or yellow), so it produces the error. Currently I am not sure if this is a error in brickrail or if the color measurement is simply unreliable in your layout. If you send me new logs (also a .brl layout file please), I can take a look at it in 5 hours or so. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, sure. I will be in bed by then, so take your time. I will get the logs and post then and the layout file below. |
Beta Was this translation helpful? Give feedback.
-
|
When I said no to a green sensor, when it asked for a green in top left I added one. but didn't update the virtual. I changed it to Blue and added it to the virtual sensor too and it now works... so blue seems like the best color to get it to work for this train. |
Beta Was this translation helpful? Give feedback.
-
|
I replaced all the Red sensors for Blue and the City Train now works. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Could you also upload a picture of the layout? |
Beta Was this translation helpful? Give feedback.
-
|
And the .brl file? |
Beta Was this translation helpful? Give feedback.
-
|
Layout.brl is in the zip above. |
Beta Was this translation helpful? Give feedback.
-
|
The layout.brl is in the zip file |
Beta Was this translation helpful? Give feedback.
-
|
This first is the B the right blue is the C I mentioned This is the A As you can see, I have changed them all to blue now. |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
It is a Prior for a siding, which I wasn't testing with... see below. |
Beta Was this translation helpful? Give feedback.
-
|
I've tweaked the color detection a bit in current master. Also did some light testing using your layout .brl file and couldn't find any issues. I am still not entirely sure why your color detection was off, but maybe these changes improved it. I also noticed that reflective materials are quite bad for the sensor. For that reason I recommend regular plates instead of tiles for the markers. Does your layout have any tiles on the tracks? Maybe the switches indeed are the problem, I only use 3D printed ones from trixbrix. The official ones seem to have quite reflective parts. If you still get marker errors, please try to increase the "chroma threshold" setting for your trains to 4000 or so. Did you use similar switches for the test layout last week? If this doesn't improve your situation, I might need to do some more extensive color testing and calibration. |
Beta Was this translation helpful? Give feedback.
-
|
On master I just fixed the issue #131 where when a train was selected, you would simply click "through" the train, selecting what was behind it. I'm not sure if that already addresses all of your reports, we can tweak the input further if required. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, thanks. I have today off, so plan to do a lot on the layout. |
Beta Was this translation helpful? Give feedback.
-
|
I loaded the Master, should the download be auto selected, as it wasn't? |
Beta Was this translation helpful? Give feedback.
-
|
The download should only be auto selected if the new release changed the hub programs, or a hub is added with a name that brickrail didn't see before. |
Beta Was this translation helpful? Give feedback.
-
|
There was another issue related to mouse clicks, the area where you could click a train always had the train wagons with no rotation. So if the train was oriented vertically, it would register the clicks in a weird way (especially the area between wagons). I fixed this in master earlier. |
Beta Was this translation helpful? Give feedback.
-
|
Well ignore what I wrote below as now, after sitting for a few hrs and a windows update, it seems to be ok. But maybe it comes and goes. There is something weird about the Connect Hubs function. It's by no way important as I've learnt to connect them manually one by one. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
Twice in sucession the BLE has disconnected while it was connecting the train and hub.. I've attached the logs. |
Beta Was this translation helpful? Give feedback.
-
|
I'm not sure whether the ble-server.log is from the same run, since there seem to be no issues there, but I do see some errors in the brickrail.log that I fixed on master yesterday. Not sure if these actually cause the problem, since they should probably have caused the issue every time, but to be sure you can just get the newest master build. |
Beta Was this translation helpful? Give feedback.
-
|
I do see some connection issues myself from time to time, so I will have to investigate more what can be done about them. |
Beta Was this translation helpful? Give feedback.
-
|
Yeah it was the correct log, as I grabbed it immeditley, but even if it was from the previos session, that also failed. |
Beta Was this translation helpful? Give feedback.
-
|
This new master doesn't seem to keep the Tick active. |
Beta Was this translation helpful? Give feedback.
-
I just updated to the newest master to test the color sensor build.
I am getting a BLE error in the terminal, then eventually it reverts to the curser and gives a Red error in the GUI.
It was in the Alpha 4 but to a lesser degree, now I cannot Connect Devices. I have tried several ways.
I can connect each device manually, eg Scan for hub, Connect.
But when I hit Connect Devices it fails.
If I try to connect hubs when they are blinking, I get the same issue.
I have attached the logs and text from the terminal.
There are several logs from today.
brickrail_BLE_Error_logs.zip
BrickRail BLE error.txt
Beta Was this translation helpful? Give feedback.
All reactions